How to connect a monitor to a figurer

Updated: 12/30/2021 by Figurer Hope

Computer monitor

To utilize a desktop calculator, a monitor is required. The monitor allows y'all to see the operating system GUI and software applications, similar a video game, document editor, or Internet browser.

How many cables are used with a monitor?

All reckoner monitors have at least two cables, a power cable and a data cable. The power cable connects to the power outlet, or better, a surge protector, and is what allows the monitor to turn on. The other cable is a data cable and is what allows the film (data) from your calculator to be displayed. The type of cable can vary depending on the blazon of connexion your video card and monitor supports. The cablevision may be a VGA, S-Video, DVI, HDMI, DP (DisplayPort), or USB-C. VGA and DVI are older connections, whereas HDMI, DisplayPort, and especially USB-C are newer.

Note

Monitors with USB ports or card readers also accept a USB cable that must be connected to the computer if you want to utilize these features. Older monitors with speakers born to them may also take sound cables that connect the monitor to the computer. However, newer monitors with speakers no longer need these cables.

How practise I know what cable to apply?

If you purchased a new monitor, it should include a cable to connect to your estimator. Nevertheless, if your video card does non support that type of cable, yous need to buy a cable supported by the computer. Alternatively, you can purchase a converter that converts ane video indicate to another signal supported by the calculator.

Tip

Generally speaking, today, nosotros recommend using an HDMI cablevision. With higher quality displays, you lot may desire to use a DisplayPort for higher refresh rates.

How to connect a monitor to the computer

  1. Notice the monitor's connector cable. Information technology should be included with your purchase.
  2. Match the cablevision with one of the video ports on the dorsum of the monitor. The images below show each of the video ports used today.

New video port connections.

Older video port connectors.

  1. Connect the cable to the corresponding ports on both your monitor and computer.

Note

The VGA and DVI cables have two screws, 1 on either side of the connector. Brand certain the cablevision screws line up and then alternate turning each screw until they are secure.

If your monitor does non take the same connector as your figurer, or yous prefer a different interface, yous have a few options.

  • You can buy a different cable that is compatible with your computer and monitor.
  • You can purchase a video converter that which changes one connector type into another.
  • Purchase a new video card or computer with the latest connectors.
  • Buy a monitor with the connectors you need.
  1. If non already done, connect the flat terminate of the monitor power cord (left cable end shown below) to the back of the monitor. The power cord may besides be built into the back of the monitor.

Monitor power cord

  1. Connect the other end of the monitor power cord (shown above) into a power outlet, or better, a surge protector.
  2. Plow on the computer and turn on the monitor. The power push for the monitor is ofttimes constitute on the forepart or bottom of the monitor on the correct side.

Tip

If your monitor has different connectors, you lot may need to switch the input type you're using with the buttons next to the power button.